Features a harness strap system and a cradle design to protect a child's neck and spine in a crash.

Children 1 to 3 years old. Keep seat in a rear-facing position until child has reached height or weight maximum recommended by seat manufacturer. Children 4 to 7 years old , OR children under 4 years old who have outgrown their seat's height and weight maximum. Feature a tether strap system that is much safer than a standard seatbelt for young children. Children 8 to 12 years old , OR children under 8 years old who have outgrown their seat's height and weight maximum. Designed to add extra height so the car's seat belt fits your child properly. Car Seat Installation Tips Don't be intimidated by the seat once you take it out of the box.

Don't try guessing—read the directions thoroughly and make sure you clearly understand how to securely install the car seat. Position car seats in the back seat. This is the safest location in the car for a child to ride. Reference your vehicle's manual. Some cars have lower anchors built into the seats that can be used to attach a safety seat.

Older cars may not have these and require the seat belt to secure the car seat.

How To Install a Child Safety Seat

The owner's manual will help you find what you need. Lock the seat belt. If your vehicle doesn't have lower anchors, refer to your owner's manual to find out how to lock a seat belt once the seat is in place. Once the safety seat is in place and attached with either the seat belt or lower anchors, wiggle it side to side, back and forth.

It should not move more than 1 inch in any direction. Lock the seat belt into position. If you're using a seat belt instead of the lower anchors, make sure you pull the seat belt all the way out to switch it into locking mode; this way the belt will stay locked when you install the seat.

Your car's owner's manual can help with this. The harness straps that hold your child in place should be snug, and the chest clip should be at the child's armpit level to keep straps from sliding off the shoulders, explains Dr.

  • south african ladies dating.
  • Choosing the Right Child Safety Seat;
  • How to Install a Car Seat: A Confused Parent's Guide?
  • perfect online dating bio.

Only when your child reaches the upper weight or height limit of her rear-facing seat, switch her to a forward-facing seat with a harness until she reaches that seat's weight limit or height restriction. Installation Tips Always use the top tether. In a IIHS survey, certified CPS techs observed parents using the top tether anchor only 56 percent of the time, and those seats installed with a seat belt were especially likely not to be tethered.

Check for the correct tether connection. Another factor involved in tether use is its location. Parents are more likely to use the top tether when the tether anchor is easy to find, found the University of Michigan Transportation Research Institute. This is often the case in sedans, which typically have tether anchors on the rear shelf behind the backseat.

As we explain in "Making Sense of LATCH" on the next page, in minivans and SUVs the top tether anchor could be on the floor, on the middle or lower seat back, in the cargo area, or on the ceiling. In fact, it's not unusual for a parent to attach the tether to the wrong hardware, such as a cargo hook, Jermakian says. In a forward-facing seat, the harness straps must be threaded through the slots that are at or above the shoulders. How to Install Booster Seats The rule: Once your child outgrows the upper weight or height limit of the forward-facing harness seat, use a belt-positioned booster until he's 4 feet, 9 inches and between 8 and 12 years of age.

How to Install a Car Seat: A Confused Parent's Guide

Installation Tips Choose the right booster for your child. High-back boosters provide more side-impact protection for smaller kids and help position kids better, especially if they fall asleep in the car. They're also a better choice in vehicles that have no head restraints, such as a pickup truck with bench seats, says Ryan. Older kids prefer backless boosters, which are less obvious, and that's fine. But use a high-back seat for as long as you can.

Secure the booster seat in your vehicle. Next, set the carrier into the base.

https://sayptosriadespper.tk Lastly, adjust the seat if necessary by turning the base over and rotating part of it. This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. Together, they cited information from 10 references. Separate the carrier from the base. Most rear-facing seats consist of two parts: You will install the base, the part that remains in the car.

How to Install Car Seats for Preschoolers

Usually, there is simply a lever or button to activate. Anchor the base to your car's back seat. If your car manufacturer included these, snap the hooks onto the metal bars at those designated spots. Check the manufacturer's instructions if you aren't sure if your car or seat has this option, or how to use it. Thread the seat belt through the base, alternatively.

Feed the belt through designated openings in the base and buckle it. The seatbelt should fit cleanly, and not be twisted or bunched up. Every vehicle and seat is different, so it's important to get this right. Not latching the seat belt correctly can increase the risk of the child getting injured in an accident. Pop the infant carrier into the base. Set it onto the base so that the child would face the rear. It should click when it's in the right position.

You can then practice taking the carrier out by activating the lever or button and setting it back into get a feel for things.

  • leo woman dating aquarius man.
  • 2 Easy Ways to Install a Car Seat (with Pictures) - wikiHow.
  • dating a little person.
  • intj dating website?
  • dating dancing dreams and dilemmas.
  • Car Seat Installation Tips.

Double check the base angle. Rear facing car seats usually have bases that can rest at different angles. The youngest infants will need to be in the more reclined position. This helps them breathe properly.

How to Install Infant and Toddler Car Seats

Change the base angle if the level is not correct or your child. Usually, this involves turning the base over and rotating a piece. Remember to change the angle later on or switch to a different seat if the baby outgrows one setting. Thread the seat belt through the car seat. After pulling the belt through and buckling it, push down on the car seat and pull on the belt so that it locks.